33 Home
Shawn Webb a édité cette page il y a 2 mois

About HardenedBSD

HardenedBSD is a fork of FreeBSD, founded in 2014, that implements exploit mitigations and security hardening technologies. The primary goal of HardenedBSD is to perform a clean-room re-implementation of the grsecurity patchset for Linux to HardenedBSD.

Some of HardenedBSD’s features can be toggled on a per-application and per-jail basis using secadm or hbsdcontrol. Documentation for both tools will be covered later.

This wiki has been ported from section 14 of the HardenedBSD Handbook.


Table of Contents


Work on HardenedBSD began in 2013 when Oliver Pinter and Shawn Webb started working on an implementation of Address Space Layout Randomization (ASLR), based on PaX’s publicly-available documentation, for FreeBSD. At that time, HardenedBSD was meant to be a staging area for experimental development on the ASLR patch. Over time, as the process of upstreaming ASLR to FreeBSD became more difficult, HardenedBSD naturally became a fork.

HardenedBSD completed its ASLR implementation in 2015 with the strongest form of ASLR in any of the BSDs. Since then, HardenedBSD has moved on to implementing other exploit mitigations and hardening technologies. OPNsense, an open source firewall based on FreeBSD, incorporated HardenedBSD’s ASLR implementation in 2016. OPNsense completed their migration to HardenedBSD on 31 January 2019.

HardenedBSD exists today as a fork of FreeBSD that closely follow’s FreeBSD’s source code. HardenedBSD syncs with FreeBSD every six hours. Some of the branches, but not all, are listed below:

  1. HEAD -> hardened/current/master
  2. stable/12 -> hardened/12-stable/master


HardenedBSD has successfully implemented the following features:

  1. PaX-inspired ASLR
  2. PaX-inspired NOEXEC
  3. PaX-inspired SEGVGUARD
  4. Base compiled as Position Independent Executables (PIEs)
  5. Base compiled with full RELRO (RELRO + BIND_NOW)
  6. Hardening of certain sensitive sysctl nodes
  7. Network stack hardening
  8. Executable file integrity enforcement
  9. Boot process hardening
  10. procs/linprocfs hardening
  11. LibreSSL as an optional crypto library in base
  12. Trusted Path Execution (TPE)
  13. Randomized PIDs
  14. SafeStack in base
  15. SafeStack available in ports
  16. Non-Cross-DSO CFI in base
  17. Non-Cross-DSO CFI available in ports
  18. Retpoline applied to base and ports

Generic Kernel Options

All of HardenedBSD’s features that rely on kernel code require the following kernel option:

options	PAX

Additionally, the following kernel option is not required, but exposes extra sysctl nodes:


Generic system hardening can be enabled with the following kernel option:


Generic System Hardening

HardenedBSD implements generic system hardening with the PAX_HARDENING kernel option. Many of these hardening features deal with restricting what non-root users are permitted to do. When the kernel is compiled with the PAX_HARDENING kernel option, certain sysctl(8) nodes are modified from their defaults.

procfs(5) and linprocfs(5) are modified to prevent arbitrary writes to a process’s registers. This behavior is controlled by the hardening.procfs_harden sysctl(8) node.

kld(4) related system calls are restricted to non-jailed, root-only users. Attempting to list kernel modules using modfind(2), kldfind(2), and other KLD-related system calls will result in permission denied if used by a non-root or jailed user.

Modified sysctl Nodes

These are the nodes that are modified from their original defaults when PAX_HARDENING is enabled in the kernel:

Node Description Type Original Value Hardened Value
kern.msgbuf_show_timestamp Show timestamp in msgbuf Integer 0 1
kern.randompid Random PID Modulus Integer 0, read+write Randomly set at boot and made read-only
net.inet.ip.random_id Assign random IP ID values Integer 0 1
net.inet6.ip6.use_deprecated Allow the use of addresses whose preferred lifetimes have expired Integer 1 0
net.inet6.ip6.use_tempaddr Use IPv6 temporary addresses with SLAAC Integer 0 1
net.inet6.ip6.prefer_tempaddr Prefer IPv6 temporary address generated last Integer 0 1
security.bsd.see_other_gids Unprivileged processes may see subjects/objects with different real gid Integer 1 0
security.bsd.see_other_uids Unprivileged processes may see subjects/objects with different real uid Integer 1 0
security.bsd.hardlink_check_gid Unprivileged processes cannot create hard links to files owned by other groups Integer 0 1
security.bsd.hardlink_check_uid Unprivileged processes cannot create hard links to files owned by other users Integer 0 1
security.bsd.stack_guard_page Insert stack guard page ahead of the growable segments Integer 0 1
security.bsd.unprivileged_proc_debug Unprivileged processes may use process debugging and tracing facilities Integer 1 0
security.bsd.unprivileged_read_msgbuf Unprivileged processes may read the kernel message buffer Integer 1 0

Address Space Layout Randomization (ASLR)

ASLR randomizes the layout of the virtual address space of a process through using randomized deltas. ASLR prevents attackers from knowing where vulnerabilities lie in memory. Without ASLR, attackers can easily craft and reuse exploits across all deployed systems. As is the case with all exploit mitigation technologies, ASLR is meant to help frustrate attackers, though ASLR alone is not sufficient to completely stop attacks. ASLR simply provides a solid foundation in which to implement further exploit mitigation technologies. A holistic approach to security (aka, defense-in-depth) is the best way to secure a system. Additionally, ASLR is intended and designed to help prevent successful remote attacks, not local.

HardenedBSD’s ASLR implementation is based off of PaX’s design and documentation. PaX’s documentation can be found here.

On 13 July 2015, HardenedBSD’s ASLR implementation was completed with full stack and VDSO randomization. Since then, various improvements have been made, like implementation shared library load order randomization. HardenedBSD is the only BSD to support true stack randomization. Meaning, the top of the stack is randomized in addition to a random-sized gap between the top of the stack and the start of the user stack.

ASLR is enabled by default in the HARDENEDBSD kernel configuration. ASLR has been tested and is known to work on amd64, i386, arm, arm64, and risc-v. The options for ASLR are:

options PAX
options PAX_ASLR

If the kernel has been compiled with options PAX_SYSCTLS, then the sysctl node hardening.pax.aslr.status will be available. The following values will determin the enforcement of ASLR:

  1. 0 - Force disabled
  2. 1 - Disabled by default. User must opt applications in.
  3. 2 - Enabled by default. User must opt applications out (default.)
  4. 3 - Force enabled


HardenedBSD’s ASLR uses a set of four deltas on 32-bit systems and five deltas on 64-bit systems. Additionally, on 64-bit systems, 32-bit compatibility is supported by a set of different deltas. The deltas are calculated at image activation (execve) time. The deltas are provided as a hint to the virtual memor-y subsystem, which may further modify the hint. Such may be the case if the application explicitly requests superpage support or other alignment constraints.

The deltas are:

  1. PIE execution base
  2. mmap hint for non-fixed mappings
  3. Stack top and gap
  4. Virtual Dynamic Shared Object (VDSO)
  5. On 64-bit systems, mmap hint for MAP_32BIT mappings

The calculation of each delta is controlled pby how many bits of entropy the user wants to introduce into the delta. The amount of entropy can be overridden in the kernel config and via boot-time (loader.conf(5)) tunables. By default, HardenedBSD uses the following amount of entropy:

Delta 32-bit 64-bit Compat Tunable Compat Tunable Kernel Option Compat Kernel Option
mmap 14 bits 30 bits 14 bits hardening.pax.aslr.mmap_len hardening.pax.aslr.compat.mmap_len PAX_ASLR_DELTA_MMAP_DEF_LEN PAX_ASLR_COMPAT_DELTA_MMAP_DEF_LEN
Stack 14 bits 42 bits 14 bits hardening.pax.aslr.stack_len hardening.pax.aslr.compat.stack_len PAX_ASLR_DELTA_STACK_DEF_LEN PAX_ASLR_COMPAT_DELTA_STACK_DEF_LEN
PIE exec base 14 bits 30 bits 14 bits hardening.pax.aslr.exec_len hardening.pax.aslr.compat.exec_len PAX_ASLR_DELTA_EXEC_DEF_LEN PAX_ASLR_COMPAT_DELTA_EXEC_DEF_LEN
VDSO 8 bits 28 bits 8 bits hardening.pax.aslr.vdso_len hardening.pax.aslr.compat.vdso_len PAX_ASLR_DELTA_VDSO_DEF_LEN PAX_ASLR_COMPAT_DELTA_VDSO_DEF_LEN
MAP_32BIT N/A 18 bits N/A hardening.pax.aslr.map32bit_len N/A PAX_ASLR_DELTA_MAP32BIT_DEF_LEN N/A

When a process forks, the child process inherits its parent’s ASLR settings, including deltas. Only at image activation (execve) time does a process receive new deltas.

Position-Independent Executables (PIEs)

In order to make full use of ASLR, applications must be compiled as Position-Independent Executables (PIEs). If an application is not compiled as a PIE, then ASLR will be applied to all but the execution base. All of base is compiled as PIEs, with the exception of a few applications that explicitly request to be statically compiled. Those applications are:

  1. All applications in /rescue
  2. /sbin/devd
  3. /sbin/init
  4. /usr/sbin/nologin

Compiling all of base as PIEs can be turned off by setting WITHOUT_PIE in src.conf(5).

Shared Library Load Order Randomization

Breaking ASLR remotely requires chaining multiple vulnerabilities, including one or more information leakage vulnerabilities. Information leakage vulnerabilities expose data an attacker can use to determine the memory layout of the process. Code reuse attacks, like ROP and its variants, exist to bypass exploit mitigations like PAGEEXEC/NOEXEC. Over the years, a lot of tooling for automated ROP gadget generation has been developed. The tools generally rely on gadgets found via shared libraries and require that those shared libraries be loaded in the same deterministic order. By randomizing the order in which shared librariers get load, ROP gadgets have a higher chance of failing. Shared library load order randomization is disabled by default, but can be opted in on a per-application basis using secadm or hbsdcontrol.


ASLR has known weaknesses. If an information leak is present, attackers can use the leak to determine the memory layout and, given time, successfully exploit the application.

Some applications, like daemons, can optionally be set to automatically restart after a crash. Automatically restarting applications can pose a security risk by allowing attackers to repeat failed attacks, modifying the attack until successful.

PaX SEGVGUARD provides a mitigation for such cases. SEGVGUARD keeps track of how many times a given application has crashed within a configurable window and will suspend further execution of the application for a configurable time once the crash limit has been reached.

The kernel option for PaX SEGVGUARD is:


Due to performance concerns, SEGVGUARD is set to opt-in by default. SEGVGUARD can be set to opt-out by setting the hardening.pax.segvguard.status sysctl node to 2.


PAGEEXEC and MPROTECT comprise what is more commonly called W^X (W xor X). The design and implementation in HardenedBSD is inspred by PaX’s. PAGEEXEC prevents applications from creating memory mappings that are both Writable (W) and Executable (X) at mmap(2) time. MPROTECT prevents applications from toggling memory mappings between writable and executable with mprotect(2). Combining both PAGEEXEC and MPROTECT prevents attackers from executing injected code, thus forcing attackers to utilize code reuse techniques like ROP and its variants. Code reuse techniques are very difficult to make reliable, especially when multiple exploit mitigation technologies are present and active.

The PAGEEXEC and MPROTECT features can be enabled with the PAX_NOEXEC kernel option and is enabled by default in the HARDENEDBSD kernel. If the PAX_SYSCTLS option is also enabled, two new sysctl nodes will be created, which follow the same symantics as the hardening.pax.aslr.status sysctl:

  1. hardening.pax.pageexec.status - Default 2
  2. hardening.pax.mprotect.status - Default 2


If an application requests a memory mapping via mmap(2), and the application requests PROT_WRITE and PROT_EXEC, then PROT_EXEC is dropped. The application will be able to write to the mapping, but will not be able to execute what was written. When an application requests W|X mappings, the application is more likely to write to the mapping, but not execute it. Such is the case with some Python scripts: the developer is simply asking for more permissions than is truly needed.

The kernel keeps a concept of pax protection. HardenedBSD drops PROT_EXEC from the max protection when PROT_WRITE is requested. When PROT_EXEC is requested, PROT_WRITE is dropped from the max protection. When both are requested, PROT_WRITE is given priority and PROT_EXEC is dropped from both the request and the max protection.


If an application requests that a writable mapping be changed to executable via mprotect(2), the request will fail and set errno to EPERM. The same applies to an executable mapping being changed to writable via mprotect(2). Applications and shared objects that utilize text relocations (TEXTRELs) have issues with the MPROTECT feature. TEXTRELs require that executable code be relocated to different locations in memory. During the reolcation process, the newly allocated memory needs to be both writable and executable. Once the reolcation process is finished, the mapping can be marked as PROT_READ|PROT_EXEC.

Some applications with a JIT, most notably Firefox, opt to create writable memory mappings that are non-executable, but upgrade the mapping to executable when appropriate. This gets rid of the problem of having active memory mappings that are both writable and executable. This makes applications like Firefox work with PAGEEXEC, but still have an issue with MPROTECT.

By combining both PAGEEXEC and MPROTECT, HardenedBSD enables a strict form of W^X. Some applications may have issues with PAGEEXEC, MPROTECT, or both. When issues arise, secadm or hbsdcontrol can be used to disable PAGEEXEC, MPROTECT, or both for just that one application.


SafeStack is an epxloit mitigation that creates two stacks: one for data that needs to be kep safe, such as return addresses and function pointers; and an unsafe stack for everything else. SafeStack promises a low performance penalty (typically around 0.1%).

SafeStack requires both ASLR and W^X in order to be effective. With HardenedBSD satisfying both of those prerequsites, SafeStack was deemed to be an excellent candidate for default inclusion in HardenedBSD. Starting with HardenedBSD 11-STABLE, it is enabled by default for amd64. SafeStack can be disabled by setting WITHOUT_SAFESTACK in src.conf(5).

As of 08 Oct 2018, SafeStack only supports being applied to applications and not shared libraries. Multiple patches have been submitted to clang by third parties to add the missing shared library support. As such, SafeStack is still undergoing active development.

SafeStack has been made available in the HardenedBSD ports tree as well. Unlike PIE and RELRO and BIND_NOW, it is not enabled globally for the ports tree. Some ports known to work well with SafeStack have it enabled by default. Users are able to toggle SafeStack by using the config make target. Additionally, the SafeStack option is only applicable to the amd64 architecture. Attempting to enable SafeStack for a non-amd64 port build will result in a NO-OP. SafeStack simply will not be applied.

Control-Flow Integrity (CFI)

Control-Flow Integrity (CFI) is an exploit mitigation technique that prevents unwanted transfer of control from branch instructions to arbitrary valid memory locations. The CFI implementation from clang/llvm comes in two forms: Cross-DSO CFI and non-Cross-DSO CFI. HardenedBSD 12 enables non-Cross-DSO CFI by default on amd64 and arm64 for base.

CFI requires a linker that supports Link Time Optimization (LTO). Starting with 12, HardenedBSD ships with ld.lld as the default linker. ld.lld supports LTO.

Non-Cross-DSO CFI adds checks both before and after every branch instruction in the application itself. If an application loads libraries via dlopen(3) and resolves functions via dlsym(3) and calls those functions, the application will abort. Some applications, like bhyveload(8) do this and thus have the cfi-icall scheme disabled, allowing it to call functions resolved via dlsym(3). Thus, if a user finds that an application crashes in HardenedBSD 12, the user should file a bug report. The cfi-icall scheme can be disabled when building world by adding a CFI override in that application’s Makefile.

Note that Non-Cross-DSO CFI does not require ASLR and strict W^X. Given that Cross-DSO CFI keeps metadata and state information, Cross-DSO CFI does require ASLR and W^X in order to be effective.

Non-Cross-DSO CFI support has been added to HardenedBSD’s ports framework. However, it is not enabled by default. Support for CFI in ports is still very premature and is only available for those brave users who want to experiment.

As of 20 May 2017, Cross-DSO CFI is being actively researched. However, support for Cross-DSO CFI is not available in HardenedBSD, yet. Cross-DSO CFI would allow functions resolved through dlopen(3)/dlsym(3) to work since CFI would be able to be applied between Dynamic Shared Object (DSO) boundaries. Significant progress has been made in the first half of 2018 with regards to Cross-DSO CFI. The base operating system can be fully compiled with Cross-DSO CFI. On 16 Jul 2018, a pre-alpha Call For Testing was released for wider initial testing. The HardenedBSD core development team hopes to launch Cross-DSO CFI in base within the latter half of 2019.


hbsdcontrol(8) is a tool, included in base, that allows users to toggle exploit mitigations on a per-application basis. Users will typically use hbsdcontrol to disable PAGEEXEC and/or MPROTECT restrictions. hbsdcontrol is similar in scope as secadm and is preferred over secadm for filesystems that support extended attributes.

Unlike secadm, hbsdcontrol does not use a configuration file. Instead, it stores metadata in the filesystem extended attributes. Both UFS and ZFS support extended attributes. Network-based filesystems, like NFS or SMB/CIFS do not. secadm is the preferred method for exploit mitigation toggling only in cases where extended attributes are not supported.

Example usage of hbsdcontrol to disable MPROTECT for Firefox:

# hbsdcontrol pax disable mprotect /usr/local/lib/firefox/firefox
# hbsdcontrol pax disable mprotect /usr/local/lib/firefox/plugin-container

As of 09 Jul 2020, various ports have exploit mitigations pre-toggled such that users do not have to worry about setting the togles themselves.

Port Path Exploit Mitigation
editors/libreoffice lib/libreoffice/program/soffice.bin PaX MPROTECT
editors/libreoffice lib/libreoffice/program/soffice.bin PaX PAGEEXEC
lang/python37 bin/python3.7 PaX MPROTECT
lang/python37 bin/python3.7 PaX PAGEEXEC
lang/python38 bin/python3.8 PaX MPROTECT
lang/python38 bin/python3.8 PaX PAGEEXEC
security/keepassxc bin/keepassxc PaX MPROTECT
security/keepassxc bin/keepassxc PaX MPROTECT
security/keepassxc bin/keepassxc PaX PAGEEXEC
sysutils/polkit lib/polkit-1/polkitd PaX MPROTECT
sysutils/polkit lib/polkit-1/polkitd PaX PAGEEXEC
www/chromium share/chromium/chrome PaX MPROTECT
www/chromium share/chromium/chrome PaX PAGEEXEC
www/firefox lib/firefox/firefox Pax MPROTECT
www/firefox lib/firefox/plugin-container PaX MPROTECT

Security Administration (secadm)

secadm is a tool, distributed via ports, that allows users to toggle exploit mitigations on a per-application and per-jail basis. Users will typically use secadm to disable PAGEEXEC and/or MPROTECT restrictions.

secadm also includes a feature known as Integriforce. Integriforce is an implementation of verified execution. It enforces hash-based signatures for binaries and their dependent shared objects. Integriforce can be set in whitelisting mode. When there is at least one Integriforce rule enabled, all desired applications and their dependent shared objects must also have rules. If an application and its shared objects are not included in the ruleset, execution of that application will be disallowed. This also affects shared objects loaded via dlopen(3).

When a file is added to secadm’s ruleset, secadm will disallow modifications to that file. This includes deleting, appending, truncating, or otherwise modifying the file. This is because secadm tracks files under its control by using the inode. Modifying the file might change the inode, or freeing it in case of deletion, thereby implicitly modifying the secadm ruleset. To protect the integrity of the loaded ruleset, secadm also protects the files it controls.

Thus, when updating installed ports or packages, care must be taken. Flush the ruleset prior to installing updates. The ruleset can be reloaded after updating.

Downloading and Installing secadm

secadm is not currently part of base, though that is planned in the near future. secadm can be installed either through the package repo:

# pkg install secadm-kmod secadm

or by using HardenedBSD’s ports tree:

# cd /usr/ports/hardenedbsd/secadm
# make install clean
# cd /usr/ports/hardenedbsd/secadm-kmod
# make install clean

Configuring secadm

By default, secadm looks for a config file at /usr/local/etc/secadm.rules. For purposes of this documentation, that file will be simply referenced as secadm.rules. secadm does not install or manage the secadm.rules file. It simply reads the file, if it exists, passing the parsed data to the kernel module. secadm can be configured either via the command-line or secadm.rules. Both secadm and secadm.rules contain manual pages. Once installed, users can look at the secadm manpage in section 8 and secadm.rules in section 5.

secadm.rules should be in a format that libucl can parse as secadm uses libucl to parse secadm.rules.

An example secadm.rules would look like this:

secadm {
	pax {
		path: "/usr/local/lib/firefox/firefox",
		mprotect: false,
	pax {
		path: "/usr/local/lib/firefox/plugin-container",
		mprotect: false,

Once secadm is configured, it can be started via the rc(8) system:

# sysrc secadm_enable=YES
# service secadm start

All secadm configuration options

These are the available pax options:

Option Requirement Type Description
path Required String Fully-qualified path of the executable
aslr Optional Boolean Toggle ASLR
disallow_map32bit Optional Boolean Toggle the ability to use the MAP_32BIT mmap(2) flag on 64-bit systems
mprotect Optional Boolean Toggle mprotect restrictions
pageexec Optional Boolean Toggle pageexec restrictions
segvguard Optional Boolean Toggle SEGVGUARD
shlibrandom Optional Boolean Toggle shared library load order randomization

Example pax configuration:

secadm {
	pax {
		path: "/usr/local/lib/firefox/firefox",
		mprotect: false,
	pax {
		path: "/usr/local/lib/firefox/plugin-container",
		mprotect: false,

These are the available integriforce options:

Option Requirement Type Description
path Required String Fully-qualified path of the executable or shared library
hash Required String sha1(1) or sha256(1) hash of the file
type Required String Type of hash. Either “sha1” or “sha256”.
mode Required String Either “soft” or “hard”. In soft mode, if the hash doesn’t match, a warning is printed in syslog and execution is allowed. In hard mode, if the hash doesn’t match, an error is printed in syslog and execution is denied.

Example integriforce configuration:

secadm {
	integriforce {
		path: "/bin/ls",
		hash: "7dee472b6138d05b3abcd5ea708ce33c8e85b3aac13df350e5d2b52382c20e77",
		type: "sha256",
		mode: "hard",

Contributing to HardenedBSD

HardenedBSD uses GitHub for source control and bug reports. Users can submit bug reports for the HardenedBSD base source code here and for ports here. When submitting bug reports, please include the following information:

  • HardenedBSD version
  • Architecture
  • If the report concerns a kernel panic, the backtrace of the panic
  • Steps to reproduce the bug

HardenedBSD Development Process

HardenedBSD uses three repositories during the development process:

Repository Purpose
HardenedBSD Main development repository
HardenedBSD-Playground Highly experimental and third-party code repository

HardenedBSD development branches:

Branch Repository Binary Updates Purpose
hardened/current/master HardenedBSD amd64, arm64 Main development branch (13-CURRENT)
hardened/12-stable/master HardenedBSD amd64 12-STABLE development
hardened/11-stable/master HardenedBSD amd64 11-STABLE development
hardened/current/drm-next HardenedBSD-Playground amd64 HardenedBSD 13-CURRENT with drm-next bits merged in
hardened/current/safestack-arm64 HardenedBSD-Playground arm64 HardenedBSD 13-CURRENT with SafeStack ported to arm64
hardened/current/cross-dso-cfi HardenedBSD-Playground N/A HardenedBSD 13-CURRENT with Cross-DSO-CFI support

Updating HardenedBSD

HardenedBSD does not use freebsd-update(8). Instead, HardenedBSD uses an utility known as hbsd-update. hbsd-update does not use deltas for publishing updates, but rather distributes the base operating system as a whole. Not utilizing deltas incurs a bandwidth overhead, but is easier to maintain and mirror. hbsd-update relies on DNSSEC-signed TXT records for distributing version information.

hbsd-update is configured via a config file placed at /etc/hbsd-update.conf. hbsd-update works on a branch level, meaning it tracks branches within HardenedBSD’s source tree. Thus, updating from one major version to another requires changing the dnsrec and branch variables in hbsd-update.conf. For example, the hbsd-update.conf for the hardened/current/master branch in the HardenedBSD repo:

dnsrec="$(uname -m).master.current.hardened.hardenedbsd.updates.hardenedbsd.org"
baseurl="http://updates.hardenedbsd.org/pub/HardenedBSD/updates/${branch}/$(uname -m)"

And as another example, the hbsd-update.conf for the hardened/11-stable/master branch in the HardenedBSD repo:

dnsrec="$(uname -m).master.11-stable.hardened.hardenedbsd.updates.hardenedbsd.org"
baseurl="http://updates.hardenedbsd.org/pub/HardenedBSD/updates/${branch}/$(uname -m)"

Thus, generating a diff between the two configuration files would result in:

--- hbsd-update_current.conf	2017-07-21 20:08:22.153616000 -0400
+++ hbsd-update_11-stable.conf	2017-07-21 20:08:38.003508000 -0400
@@ -1,4 +1,4 @@
-dnsrec="$(uname -m).master.current.hardened.hardenedbsd.updates.hardenedbsd.org"
+dnsrec="$(uname -m).master.11-stable.hardened.hardenedbsd.updates.hardenedbsd.org"
 baseurl="http://updates.hardenedbsd.org/pub/HardenedBSD/updates/${branch}/$(uname -m)"

back to top